Please Wait

EN
  • FA
  • NL
  • EN

MTS screw pump

MTS pumps are screw pumps designed for high pressure pumping of cooling lubricants and cutting oils for machine tool applications. These pumps come with various pump sizes and screw pitches to provide the flow and pressure required.

  • Product ID : 713-714
  • Categories : oil and gas | petrochemical | food industries | medical sector | drilling
  • Company : Grundfos holding
  • Description
  • Specification
  • DESCRIPTION

    MTS pumps are screw pumps designed for high pressure pumping of cooling lubricants and cutting oils for machine tool applications. These pumps come with various pump sizes and screw pitches to provide the flow and pressure required.

    Using MTS screw pumps in machine tool applications, where high pressure is required, results in an increased surface quality and a decreased machining time. The MTS pump is available in different installation variants, such as tank top, in-tank and dry installation, all with a range of connection options.

     

    Specification:

    • Motor: Standard IE3 motor. Motor protection directly from PTC. IP55 as standard, available in a tropicalised variant for condensing environments.
    • Screw pump design: High efficiency from the unique three-screw pump design and fine tolerances lead to operation with reduced cooling efforts and low operational costs
    • Resistance to high pressure: The extra-long pressure compensation piston with labyrinth seal and the hydrostatic axial thrust balancing with special pressure compensation bushings increase resistance to high pressure
    • Maintenance-free sealing: Seal ring or mechanical seal according to EN 12796
    • Broad range: Large number of pump sizes and pitch angles for different flows, and tank top, dry and horizontal installation
    • Operation: Low vibration and noise level and long lifetime from highly wear-resistant hardened rotor housing and PVD-coated spindles
    • Leakage inspection tube: The transparent tube allows you to see when any leakage starts, enabling you to plan maintenance

     

    MTSE – Integrated frequency converter

    An E-solution means electronic control and energy savings. This all-in-one solution with pump, motor and integrated frequency converter is packed with intelligent features that makes installation, operation, and service exceptionally easy and performance much more efficient and reliable. The MTSE is a smaller and more compact pump which is designed to run at power limit. This makes it possible to boost the pressure at lower flows by increasing the frequency, and you can also use the motor 100 % over the full pump curve. The compact, integrated design comes with one drive for use worldwide and complies with all international standards.

    • IE5 motor with an integrated frequency converter
    • Sensors
    • BUS communication
    • Pump motor monitoring and protection

     

    MTS/MTSE Pump system – all components fully integrated

    Assembled pump system with MTS/MTSE screw pump, mounting plate, pressure relief valve and piping.

    • Fully integrated all-in-one system: All components, including valves, are preassembled to customer specifications.
    • Economical pump operation: Pump efficiency above 80 % with low heat transfer into the coolant system and low cooling requirements
    • Pressure relief valves: The pressure relief valves below are especially designed for use in coolant applications.
  • SPECIFICATION

    Flow rate max 64.5 m³/h (1075 l/min)
    max 6.9 m³/h (115 l/min)
    Head max 100 bar
    Motor 1.5-200 kW
    1.5-11 kW
    Liquid temp. 0 °C to +80 °C
    Liquid Min 2 % oil
    Viscosity 1 to 2000 mm²/s
    Pump sizes 16
    6
    Rotor housing Special hardened, 1200 HV
    Screws PVD coating, 1200 HV
    Internal thread Rp
    Flange SAE

RELATED PRODUCTS